Carlos Méndez; Yusuf Biçer · 10.1002/ese3.892 https://doi.org/10.1002/ese3.892
Energy Science & Engineering
Comparison of the influence of solid and phase change materials as a thermal storage medium on the performance of a solar chimney Carlos Mendez; Yusuf Bicer Abstract This paper studies the heat storage system's influence on a solar chimney's power production. This study considers several material types, including solid and phase change materials, at the bottom section of a solar chimney for energy storage, and evaluates their effects on the energy yield and capacity to prolong the power output during the absence of the sun. A computational fluid dynamic model using COMSOL Multiphysics is performed to carry out this work. An initial steady‐state analysis using average monthly irradiance is implemented, after which the top two solid and phase change material options are selected. Subsequently, a time‐dependent simulation using a typical summer day is carried out for the chosen storage materials. The overall performance results are comparatively assessed in terms of average temperature, power generation, and efficiency. As a result, bismuth‐led‐tin‐cadmium and magnesium chloride hexahydrate present the highest power production among the phase change materials, giving a yearly average power output of 27.46 kW and a storage temperature of about 346 K. On the other hand, sandstone offers the highest overall annual average power production, yielding 31.49 kW, and a storage temperature of 352.17 K. This material also reflects the highest yearly average energy and exergy efficiencies with 0.122% and 0.128%, respectively.
Numerical / CFD
Solar chimney power plant
Thermal storage / PCM
2021
Energy Science & Engineering
yes
2021-03-26 12:00:00 00002494
comparison of the influence of solid and phase change materials as a thermal storage medium on the performance of a solar chimney
2021
Energy Science & Engineering
Carlos Méndez; Yusuf Biçer
10.1002/ese3.892
Abstract
Abstract This paper studies the heat storage system's influence on a solar chimney's power production. This study considers several material types, including solid and phase change materials, at the bottom section of a solar chimney for energy storage, and evaluates their effects on the energy yield and capacity to prolong the power output during the absence of the sun. A computational fluid dynamic model using COMSOL Multiphysics is performed to carry out this work. An initial steady‐state analysis using average monthly irradiance is implemented, after which the top two solid and phase change material options are selected. Subsequently, a time‐dependent simulation using a typical summer day is carried out for the chosen storage materials. The overall performance results are comparatively assessed in terms of average temperature, power generation, and efficiency. As a result, bismuth‐led‐tin‐cadmium and magnesium chloride hexahydrate present the highest power production among the phase change materials, giving a yearly average power output of 27.46 kW and a storage temperature of about 346 K. On the other hand, sandstone offers the highest overall annual average power production, yielding 31.49 kW, and a storage temperature of 352.17 K. This material also reflects the highest yearly average energy and exergy efficiencies with 0.122% and 0.128%, respectively.
Abstract by the authors, reproduced under the CC BY 4.0 licence. Original publication via the link below.
Open source
PDF (open access)