Marko Šućurović; Dardan O. Klimenta; Darius Andriukaitis; Mindaugas Žilys; Tomyslav Sledević; Milan Tomović · 10.3390/app15031664 https://doi.org/10.3390/app15031664
Applied Sciences
An Analytical Model for the Steady-State Thermal Analysis of Facade-Integrated PV Modules Cooled by a Solar Chimney Marko Sucurovic; Dardan O. Klimenta; Darius Andriukaitis; Mindaugas Zilys; Tomyslav Sledevic; Milan Tomovic This paper proposes a steady-state thermal model for the passive cooling of photovoltaic (PV) modules integrated into a vertical building facade by means of a solar chimney, including an empirical correlation for turbulent free convection from a vertical isothermal plate. The proposed analytical model estimates the air velocities at the inlet and at the outlet of the ventilation channel of such a cooling system and the average temperature of the facade-integrated PV modules. A configuration composed of a maximum of six vertically installed PV modules and one solar chimney is considered. The air velocities at the inlet and at the outlet of the ventilation channel obtained for the case of installing PV modules on the building facade are compared with those calculated for the case where the PV modules are integrated into the roof with a slope of 37°. By comparing each of the solutions with one PV module to the corresponding one with six PV modules, it was found that the increase in the air velocity due to the effects of the solar irradiance and the height difference between the two openings of the ventilation channel ranges between 41.05% in the case of “Roof” and 141.14% in the case of “Facade”. In addition, it was obtained that an increase in the solar chimney height of 1 m leads to a decrease in the average PV section temperature by 1.95–7.21% and 0.65–2.92% in the cases of “Roof” and “Facade”, respectively. Finally, the obtained results confirmed that the use of solar chimneys for passive cooling of facade-integrated PV modules is technically justified.
Hybrid system
Numerical / CFD
2025
Applied Sciences
yes
2025-02-06 12:00:00 00002033
an analytical model for the steady-state thermal analysis of façade-integrated pv modules cooled by a solar chimney
2025
Applied Sciences
Marko Šućurović; Dardan O. Klimenta; Darius Andriukaitis; Mindaugas Žilys; Tomyslav Sledević; Milan Tomović
10.3390/app15031664
Abstract
This paper proposes a steady-state thermal model for the passive cooling of photovoltaic (PV) modules integrated into a vertical building façade by means of a solar chimney, including an empirical correlation for turbulent free convection from a vertical isothermal plate. The proposed analytical model estimates the air velocities at the inlet and at the outlet of the ventilation channel of such a cooling system and the average temperature of the façade-integrated PV modules. A configuration composed of a maximum of six vertically installed PV modules and one solar chimney is considered. The air velocities at the inlet and at the outlet of the ventilation channel obtained for the case of installing PV modules on the building façade are compared with those calculated for the case where the PV modules are integrated into the roof with a slope of 37°. By comparing each of the solutions with one PV module to the corresponding one with six PV modules, it was found that the increase in the air velocity due to the effects of the solar irradiance and the height difference between the two openings of the ventilation channel ranges between 41.05% in the case of “Roof” and 141.14% in the case of “Façade”. In addition, it was obtained that an increase in the solar chimney height of 1 m leads to a decrease in the average PV section temperature by 1.95–7.21% and 0.65–2.92% in the cases of “Roof” and “Façade”, respectively. Finally, the obtained results confirmed that the use of solar chimneys for passive cooling of façade-integrated PV modules is technically justified.
Abstract by the authors, reproduced under the CC BY 4.0 licence. Original publication via the link below.
Open source
PDF (open access)